AadeeNetwork monitoring for every customer's switches, firewalls and Wi‑Fi.
Firewalls, switches, access points, printers and UPS next to the computers you manage — online or not, toner and battery levels, configuration backups and changes you can undo. Meraki and UniFi networks come straight from their cloud.
Why watch the network too?
When “the internet is down” the cause is often not a computer but the firewall, a switch or the Wi-Fi. If those devices are watched in the same console as the computers, you see the real cause at once — for one office or for every customer.
AadeeRMM watches network devices without installing anything on them. A computer at the customer that already runs the AadeeRMM agent checks them over the local network, and cloud-managed networks (Cisco Meraki, UniFi) are read from their own cloud.
Every device that keeps an office online.
Add devices by hand, find them with a network scan, or connect a Meraki or UniFi account.
Meraki and UniFi cloud
Connect a customer's Meraki organisation or UniFi account with an API key: switches, access points and gateways appear with their status every 5 minutes.
Online, offline and response time
The customer's probe computer pings each device; an offline firewall or switch raises an alert like any computer.
SNMP readings
Toner and paper on printers, battery and mains power on UPS, disk space on storage — read over SNMP from the probe computer.
Configuration backups and undo
The running configuration of Cisco, Fortinet, Juniper, MikroTik, Aruba and Ubiquiti devices is pulled over SSH and kept only when it changes. Pick an earlier version and AadeeRMM writes the commands that put it back, for you to check first.
FortiGate VPN tunnels
With a read-only API token, AadeeRMM shows each FortiGate's IPsec tunnels, SSL-VPN users, CPU, memory and firmware, and alerts when a tunnel stays down.
Live SSH terminal
Open the device's own command line in your browser, through the customer's probe computer. Every command is recorded in the audit log.
Every change is on the record.
Run commands on a switch or firewall from AadeeRMM and the configuration is saved before and after, so you see exactly what changed, by whom — and can go back to any earlier version.
See pricingBefore and afterA configuration snapshot either side of every change, with the technician's name.
Version historyThe last 50 versions of each device, kept only when something really changed.
Passwords kept safeSSH logins and API keys are stored encrypted and never shown again; viewing a configuration is audited.
Up and running in three steps.
Connect a network
Add devices by IP address, run a network scan from a customer's computer, or paste a Meraki or UniFi API key.
Switch on what you need
Turn on SNMP for printers and UPS, and an SSH login for configuration backups of switches and firewalls.
Watch and act
Offline devices, low toner and configuration changes show in the same alerts and reports as the computers.
Network monitoring: questions, answered.
Which network devices can AadeeRMM watch?
Firewalls, routers, switches, Wi-Fi access points, printers, storage (NAS) and UPS from any maker, by ping and SNMP. Cisco Meraki and UniFi networks can also be connected to their cloud.
Do I need to open ports on the customer's firewall?
No. A computer of that customer that already runs the AadeeRMM agent reaches the devices on the local network and only connects out to AadeeRMM over HTTPS. Meraki and UniFi are read from their cloud with an API key.
Which devices does configuration backup support?
Cisco IOS and IOS-XE, Cisco ASA, HPE Aruba and ProCurve, Fortinet FortiGate, Juniper Junos, MikroTik RouterOS and Ubiquiti EdgeOS or VyOS, plus any device that answers “show running-config”.
Does AadeeRMM watch FortiGate VPN tunnels?
Yes. Give AadeeRMM a REST API token of a read-only FortiGate admin. Every 5 minutes the customer's probe computer reads the IPsec tunnels, SSL-VPN users, CPU, memory, interfaces and firmware, and an alert opens when a tunnel has been down for 10 minutes. Nothing is changed on the firewall.
Can AadeeRMM change Meraki or UniFi devices?
Meraki devices can be restarted and made to blink their lights from AadeeRMM. The UniFi cloud API only reads, so UniFi devices are shown and watched, not changed.
Which plan includes network monitoring?
Network devices, SNMP, Meraki and UniFi, FortiGate monitoring and configuration backups are in every plan. The live SSH terminal is part of the Professional plan.
One console for the whole job.
See every customer's network today.
Try every feature free for 14 days on up to 25 devices. No card, no commitment.
Questions first? Talk to us